PRESIDENT MC Kinley TXPR600, Руководство пользователя

Страница: 49 / 76

49
2.
Press the
CH
knob (
5
) button to
confirm
. The radio automatically
switches to
TX
mode without pressing the PTT switch ( 12 ) and
calibration begins. Calibration time is 5 minutes maximum. A
countdown is done in the display.
3. Adjust the antenna.
- The beep* is continuous when the SWR value is
1.0
. The space
between the beeps becomes larger and larger as the SWR value
moves away from
1.0
.
- The volume of the beep is adjustable with the
VOL
button (
1
).
- The display shows the SWR value, for example
2.5
.
4.
Press the
PTT
switch (
12
) to
exit
the
SWR CALIBRATION
.
*Check that the beep volume is set to a suitable level.
See
ADJUSTMENT OF SWR
page 41.
9) ECHO ADJUSTMENT
Press the CH knob ( 5 ) for 3 seconds to enter MENU . appears.
1.
Turn the rotary
CH
knob (
5
) or use the
UP/DN
buttons (
13
) on the
microphone to select the ECHO SET menu.
2. Press the CH knob ( 5 ) button to confirm . The LEVEL of the ECHO
flashes in the display.
3. Turn the rotary CH knob ( 5 ) or use the UP/DN buttons ( 13 ) on the
microphone to
set
the level value from
1
to
32
(default level:
13
).
4. Press the CH knob ( 5 ) button again to validate the level value.
The second parameter, DELAY , flashes.
5.
Use the rotary
CH
knob (
5
) or the
UP/DN
buttons (
13
) on the mi-
crophone to set the delay value from
1
to
32
(default value:
16
).
6.
Press the
CH
knob (
5
) again to
confirm
the delay value. The delay
stops flashing. a) Start again at point 1 to set another function or
b) Press the PTT switch ( 12 ) to exit MENU .
7.
If no key is pressed, the unit
exits MENU
after 10 seconds. dis-
appears from the display.
See §
ECHO
page 45.
10) TONE
This function allows to change the
RX
TONE . 11 steps from
-5
to
+5
Press the CH knob ( 5 ) for 3 seconds to enter MENU . appears.
1.
Turn the rotary
CH
knob (
5
) or use the
UP/DN
buttons (
13
) on the
microphone to
select
the TONE menu.
2. Press the CH knob ( 5 ) to confirm . The tone value flashes in the
display.
3. Turn the rotary CH knob ( 5 ) or use the UP/DN buttons ( 13 ) on the
microphone to
change
the value of the tone.
4a.
Short press the
CH
knob (
5
) again to
validate
the selected value
and stay in the MENU .
4b.
Long press (1s) the
CH
knob (
5
) again to
validate
the selected
value and exit in the MENU . disappears from the display.
5.
If no key is pressed, the unit
exits MENU
after 10 seconds. dis-
appears from the display.
Tone default value is :
0
.
11) EMERGENCY CHANNEL 1
Press the
CH
knob (
5
) for 3 seconds to
enter MENU
. appears.
1. Turn the rotary CH knob ( 5 ) or use the UP/DN buttons ( 13 ) on the
microphone to
select
the
EMG 1
menu.
2. Press the CH knob ( 5 ) button to confirm . The first parameter, the
modulation mode, flashes in the display.
3.
Turn the rotary
CH
knob (
5
) or use the
UP/DN
buttons (
13
) on the
microphone to set the modulation mode for emergency channel
1: AM, FM, USB, LSB or FM UK (in
U
configuration only).
4. Press CH knob ( 5 ) again to confirm . The modulation mode stops
flashing, the second parameter, the channel, flashes in the display.
5.
Use the rotary
CH
knob (
5
) or use the
UP/DN
buttons (
13
) on the
microphone to select the emergency channel 1.
6.
Press
CH
knob (
5
) again to
confirm
the channel.
a)
Start again at
point 1 to set another function or b) Press the PTT switch ( 12 ) to
exit MENU .
7.
If no key is pressed, the unit
exits
the
MENU
after 10 seconds.
disappears from the display.
Emergency channel 1 default is
9
in AM.
See § EMERGENCY CHANNELS page 44.
12) EMERGENCY CHANNEL 2
Press the
CH
knob (
5
) for 3 seconds to
enter MENU
. appears.
English