45
ECHO
(9 + 9 short press)
Press the • key (
9
) , flashes, then briefly press the •
ECHO
key (
9
)
to
activate
the
ECHO
function.
“ECHO”
appears in the display. A
new combination of the • (
9
) and
•ECHO
(
9
) keys,
deactivates
the function.
“ECHO”
disappears.
M3
See
MEMORY
page 45.
10) F ~ MIC GAIN ~ RF GAIN
F
See
In U configuration only
on page 43.
See §
TALKBACK
page 46.
See §
FUNCTION TURNING ON THE UNIT
page 46.
MIC GAIN
(combination 12 / 9 + 10)
Adjust the microphone sensitivity level.
- Press and hold the
PTT
switch (
12
)
- Press the • key (
9
).
- Press the •
MIC/RF GAIN
key (
10
).
“MIC GAIN”
is displayed.
- Turn the rotary
CH
knob (
5
) to
adjust
the level using the bargraph.
- Press the
CH
knob (
5
) for 1 second to
confirm
the setting.
The normal position of this function is at maximum level. MIC GAIN
bargrah will be displayed on transmission.
RF GAIN
(9 + 10)
Setting the reception sensitivity. Maximum position in the case of
long-distance call reception. You can decrease the
RF GAIN
, to
avoid distortions, when the interlocutor is near. Reduce the gain
on reception in the case of a close communication with a corre-
spondent not equipped with a
RF POWER
.
- Press the • key (
9
).
- Press the •
MIC/RF GAIN
key (
10
).
“RF GAIN”
is displayed.
- Turn the rotary
CH
knob (
5
) to
adjust
the level using the bargraph.
- Press the
CH
knob (
5
) button for 1 second to
confirm
the setting.
The bargraph of the RF GAIN
will always be displayed in reception.
9) “•” Key ~ MEMORY ~ ECHO ~ M3
“•” Key
(short press)
Pressing the • key (
9
)
activates
the
FUNCTION
mode. flashes.
Combine with another key beginning with • (•VOX, •EMG, •ECHO,
•RF POWER or •MIC/RF GAIN) to
access
the function.
Note:
The • key (
9
) is always combined with another key. Pressing
the key alone has no effect except to flash for 10 seconds.
MEMORY
(long press)
This CB radio allows you to
memorize
3 channels with the following
attributes: NB/ANL (on/off), HI-CUT (on/off), AM / FM / USB / LSB.
To store into memory:
- Select the channel and its attributes.
- Press the
MEM
key (
9
) for one second. If the
KEY BEEP
function is
active, a beep sounds.
“MEM”
flashes.
- Press for one second one of the keys
M1
(
7
),
M2
(
8
) or
M3
(
9
) to
memorize.
“MEM”
appears in the display and the number of the
selected memory (
M1
,
M2
or
M3
) flashes.
-
If the
KEY BEEP
function is active, a long beep confirms the success
of the operation.
To call a memory:
- Press the
MEM
key (
9
) for one second. If the
KEY BEEP
function is
active, a beep sounds.
“MEM”
flashes.
- Briefly press one of the
M1
(
7
),
M2
(
8
) or
M3
(
9
) keys to display the
selected memory.
-
“MEM”
is displayed, the number of the selected memory (
M1
,
M2
or
M3
) flashes.
To erase a memory:
- Turn off the device.
- Hold one of the keys
M1
(
7
),
M2
(
8
) or
M3
(
9
) and switch on the
appliance.
- The selected memory is
erased
.
“MEM”
and the number of the
selected memory (
M1
,
M2
or
M3
) disappear from the display.
See also the
RESET
menu on page 50.
English
