PRESIDENT ANDY II FCC, Руководство пользователя

Страница: 9 / 56

9
the
weather channel
blink on the display. The unit cancels
CB
or
PA mode and goes to WX mode.
During a SIREN tone sound, press any key to stop the sound, “ALERT”
and the
Weather Channel
stop blinking on the display.
Note: The SIREN tone sounds when an ALERT is detected in the
selected
weather channel only. Use first
SCAN
function in
WX
mode to detect the alerts in all the weather channel (see § CB/
WX
page 8) .
7) EMG ~ EMG STORE
EMG
(short press)
Emergency channels will be automatically selected by pressing
the EMG key ( 7 ). First press : emergency channel 1 is activated.
Second press: emergency channel
2
is activated. Third press: return
to the current channel. “EMG” appears on the display when an
emergency channel is activated. The default emergency channels
are channel
9
(
1
) and channel
19
(
2
).
Note:
Activating an emergency channel prevents use the
PA
(see
§ PA page 11) mode. If the KEY BEEP function is activated, an
error beep sounds.
EMG STORE
(long press)
Emergency channel can be stored to any channel. To set a new
emergency channel:
- Short press the
EMG
key (
7
) to call the current emergency channel.
“EMG” appears on the display.
- Long press the EMG/STORE key ( 7 ). appears on the display and
“EMG” blinks.
- Using the
s
/
t
keys (
3
), select the new emergency channel.
- Short press the PTT switch ( 11 ) to validate and store the new emer-
gency channel. A validation beep sounds.
Note: Emergency setting is not allowed if the active channel is not
an emergency channel.
8) VOX ~ VOX SET
VOX
(short press)
The
VOX
function allows transmitting by speaking into the original
microphone (or in the optional vox microphone) without pressing
the PTT switch ( 11 ). The use of an optional vox microphone con-
nected to the rear panel of the transceiver (
E
) disables the original
microphone.
Press shortly the
VOX
key (
8
) in order to activate the
VOX
function.
«VOX» appears on the display. A new press on the VOX ( 8 ) key
disables the function, «VOX» disappears.
VOX SET
(long press)
1. Long press the VOX/SET key ( 8 ) to enter the VOX SETTING . “VOX”
blinks, the current setting and its value appear on the display.
Three parameters allow to adjust the
VOX
: Sensitivity:
L
/ Anti-vox
level:
A
/ Vox delay time:
t
.
2a.
Use the
s
/
t
key (
3
) to modify the current parameter then, press
the NB key ( 5 ) to select the next parameter or....
2b. Press first the NB key ( 5 ) to select another parameter and then use
the
s
/
t
key (
3
) to modify the current parameter.
3. When all adjustments are done, press the PTT switch ( 11 ) to store
and exit. If the
KEY BEEP
function is activated, a long beep sounds
to confirm the success of the operation (see § KEY BEEP page
10) .
4.
If no key is pressed for 10 seconds, the unit automatically exits the
function VOX SETTING without saving.
- Sensitivity
L
: allows the adjustment of the microphone (original one
or optional vox) for an optimum transmission quality. Adjustable
level from
L1
(high level) to
L9
(low level). Default value:
L5
.
- Anti-Vox
A
: allows disabling the transmission generated by the
surrounding noise. The level is adjustable.
AF
(according the
squelch level) and from
A0
(without anti-vox) to
A9
(low level).
Default value:
AF
.
- Delay time
t
: allows avoiding the sudden cut of the transmission
by adding a delay at the end of speaking. The level is adjustable
from
t1
(short delay) to
t9
(long delay). Default value:
t1
.
VOX SETTING
doesn’t activate the
VOX
function.
EnglishEnglish