Page 10
Presentation Switchers, Inc.
EDID and Image Resolu ons
EDID and Image Resolu ons
By default, image resolu on is set to XGA (1024 X 768) using Table Select mode. The installer
can override this feature by selec ng an image resolu on from a table or by selec ng EDID
Passthru Mode.
In Passthru mode, the source nego ates directly with the display device to determine the best
possible display resolu on.
Audio on HDMI Connector
Audio on HDMI Connector
When connec ng to the HDMI connector, audio from the input device or source selected will
pass directly to the display device. This includes audio from analog sources that are digi zed
and embedded onto the HDMI stream.
HDCP Encrypted Sources
HDCP Encrypted Sources
Signals which are encrypted using HDCP will pass directly to the HDMI connector in all situa-
ons. The VGA connector will indicate a disconnected signal and audio will not be present on
the Line Level output.
Connecting Audio Output Devices
Connecting Audio Output Devices
The PS510 is equipped with a line level stereo audio output. Line level audio, by default, is a ste-
reo audio balanced output. Using the male audio connectors provided (shown below), connect
the audio signals as indicated below. Tighten with a 1/8”
fl
at head screw driver (tweeker).
Line Out Audio Connector (Male Connector)
Audio Pin Confi guration (Female Connector)
