3 SAFETY INFORMATION FOR THE OPERATOR
With the help of this Instruction Manual, instruct each user in the safe operation of this care bed before it is
put into service for the first time.
Advise the user of any hazards which may occur if not handled correctly.
Only persons who have been properly instructed may operate this care bed. This also applies for persons
who only operate the care bed on a temporary basis.
According to section 41B of the Therapeutic Goods Act 1989, this bed is Class I medical device.
Australian Register of Therapeutic Goods (ARTG) Number 310585
Please observe your obligations as the operator in accordance with the Therapeutic Goods Act Products
Ordinance, in order to ensure the permanently safe operation of this medical product with no risk of danger
to patients, users or third parties. If the care bed is used on a long-term basis, checks for proper functioning
and for any visible damage must be performed and documented at least once a year.
3.1 SAFETY INFORMATION FOR THE USER
Ensure the operator instructs you in the safe operation of this bed.
In addition, pay particular attention to the general safety information as described in
2
.
Adjustments of the bed must only be carried out by suitably instructed persons or in the presence of an
instructed person.
Make sure the mattress base is at its lowest position before leaving the patient unattended. This will
minimise the risk of injury to the patient when getting in or out of bed.
If there is a suspected fault or damage, unplug the mains plug from the socket. Clearly mark the care bed
as “Out of Order” and immediately take it out of service and inform the person in charge without delay.
GENERAL INFORMATION
USER MANUAL
Page 5
USER MANUAL
Page 5
