4
3x5 m series
premium
GB
Assembly Instruc! ons
Introduc! on
Congr
atula
ti
ons on the purchase of your new product
.
Our customer service department or authorised sales
representa ve will be happy to answer your ques ons and give any valuable instruc ons.
Your new tent will give you freedom to plan many ac vi es. It can be used at a party, to screen you from the sunlight,
as a shelter, for storage and in many other ways.
Please observe the instruc ons provided below in order to extend the useful life of your tent.
Important
Please read these assembly instruc ons before usage of the tent and keep it for future reference.
Safety
The tent was not tested for wind and snow loads, unless that is clearly indicated by the manufacturer. Therefore, these
loads are not covered by guarantee. Please watch the weather forecasts to be able to properly protect or disassemble
the tent before problems appear.
Warnings
1.
Tents are intended for temporary accommoda on and should be taken down in adverse weather condi ons.
2.
Always be sure to keep suffi
cient distance to hoses as well as gas and power lines to avoid possible damage.
Please check the area for power cables and gas lines. Ask your local autority for further informa on to avoid
damages.
3.
When using suitable heaters (available e. g. in specialist shops), keep a minimum distance of 1.2 m to tarp
material. Open fi re or heaters with open fl ames such as pa o heaters, umbrella heaters, gas heaters etc.
should not be used in any case.
4.
The person se&
ng up the tent is responsible for adequately securing it to ensure its safety. Please check
the anchoring constantly to avoid damages. A stabil anchoring can extend the endurance of the tent.
5.
Please wear head protec on, gloves and solid shoes. The heavy metal parts could have sharp edges
and could be oily because of rust preven on treatment.
6.
Please make sure that there is no permanent snow load. It should be removed right away. The same applies
for rain and other forms of load.
Children should not play with the spare parts of the tent. These components must be adequately protected.
Please fi nd a fl at and even ground base to pitch the tent. Only those materials provided with the tent can be used.
