premiere XH-1003, Руководство по эксплуатации, Страница: 10 / 12

8
3. Press “SET”
，
until the screen shows“ I ”
，
then write down this value shown in
“set” without adjusting
；
(the value shown is
just an example)
4. Re-press the “SET” button until the screen shows
，
then adjust using
“▲or▼”
arrows. Set the value to one half of previous value “ I ”
；
Adjust this parameter
（
should be the half value of previous step I’s value
）
5. Continue pressing “SET” until the screen shows “ ”
，
then adjust using
“▲or
▼” to set the parameter value at “100”.
Set this value at “100”
6. Parameter value set is done; hold “SET “for five seconds to exit the parameter
setting status. Then proceed to heating work.