Premier SX-4659DSD, Инструкция по эксплуатации

Страница: 47 / 51

Before resorting to maintenance service, please kindly check by yourself
with the following chart.
The player
breaks down
when a USB
drive ormemory
card is inserted
into the player. The connected USB drive or the
memory card is probably not of a
certified one.
The player cannot play any uncertified
USB driveand memory card.In case the
player breaks down, turn it off,
disconnect the power cord from the AC
outlet and unplug the USB drive or /and
the memory card from the player. Then,
power on the player again. The player
will resume thenormal status.
The AC power cord is not connected to
the power supply or is not connected to a
power supply securely.
Please check that the AC power cord
is connected securely.
Picture
There is no picture
or the picture is
distorted.
Set an appropriate video output
mode.Press [V-MODE] repeatedly until
the picture becomes normal again.
Connect the video cable securely.
Sound
There is no sound
or the sound is
distorted.
The audio cables aren't connected
securely.
The volume is set at the lowest level.
The sound is switched off.
The disc is in fast forward/rewind
playback.
Connect the audio cables securely.
Turn up the volume.
Press [MUTE] on the remote control
to switch on the sound.
Press [PLAY/PAUSE].
The remote
control does not
function.
There is no battery in the remote control.
The batteries are out of charge.
The remote control isn't pointed to the
remote sensor.
The remote control is out of its working
area.
The unit is shut down.
Install two AAA/1.5V batteries in it.
Replace the batteries with new ones.
Make sure that the remote control is
pointed to the remote control sensor.
Make sure the remote control is
within the working area.
Switch off the unit and disconnect it
from the AC outlet. Then power on the
unit again.
The buttons on
the unit doesn't
work.
Switch off and unplug the player.
Then connect the plug to the power
supply and switch it on again.
Unable to play a
disc This disc is placed in the disc tray in a
wrong way.
The rating of the disc is higher than the
rate set in the parental control item.
The unit isn't compatible with the disc.
The disc is dirty.
Check that the disc is placed in the
disc tray with its label side upwards.
Reset the settings in the parental
controlitem.
/
Clean the disc.
No Power
Symptom Cause(s) Remedy
The unit is being interfered with static
electricity etc.
Video input mode of the connected TV
isn't correctly set.
Video output mode of this unit isn't
correctly set.
Page 21
Troubleshooting