Premier SX-4659DSD, Инструкция по эксплуатации

Страница: 41 / 51

Press to temporarily pause a playback. Press it again to resume the playback.
Or, press to resume the normal playback from the fast forward, fast reverse,
frame-by-frame playback, etc.
Press repeatedly for fast forward playback in different speeds.
Press repeatedly for fast reverse playback in different speeds.
Press to skip to the previous chapter/track.
Press to skip to the next chapter/track.
Press once to pause a playback, then press [ ] to continue the playback;
Press it twice to stop a playback and the disc will be reset to the starting point.
Page 15
Remote Control Function
OPEN/CLOSE:
Press to open /close the disc tray.
STANDBY:
Note: Being in the standby mode uses a minimal amount of electricity, but ensures that
the components of the unit operate at maximum efficiency from the moment you start.
Switch on the unit. /Put the unit in standby mode.
SETUP:
Press to enter/exit the setup menu.
The digit keys can be used to input the corresponding numbers or make
selection of a track or a chapter of a disc, etc.
5 5 6 6
8 8 9 9
10+ 10+ 0/10 0/10
2 2 3 3
1 1
4 4
7 7 9 9
GOTO:
During playback, press to enter the GOTO menu. In the menu, use the direction
key [UP]/[DOWN] to select a setting item and press [ENTER] to enter the editing state,
then with the digit keys input a specific track, disc time, track time, chapter, title, chapter
time or title time to go to directly. Press it again to exit the GOTO menu.
PROGRAM:
Press this button to enter/exit the program menu with which you can
playback the contents of a disc in your desired order.
In the program menu, use the direction keys, digit keys and [ENTER] to make a program
list, then move the highlight to
START and press [ENTER] to start program playback.
During program playback, press this button to enter the program menu and the STOP is
highlighted, press [ENTER] to cancel program playback.
ENTER:
Press to enter an item in the menu or to confirm your operation etc.
The direction keys can be used to move the highlight or adjust the value of an item
in the menu .
SOURCE/SOURCE SELECT
:
Press repeatedly to select a signal source among DVD,
TUNER(AM/FM) and AUX/MP3 IN.
USB:
Press to switch to the available extra signal source USB and memory card,or to
return to the DVD mode.