Page 8
Using Your Steering Wheel Remote Control
1. Radio Tune down & Track down / fast Rewind
2. Radio Tune up & Track up / fast Forward
3. Mute Button
4. Pre-Scan / Auto-Store Button
5. Mode Selector
6. Audio level & Menu UP(+) / Down(-) Control
Remove the tag from the remote before the first using:
An insulation thin tag was installed in your remote by the
manufacturer to prevent the battery from draining.
1) Open the cover on the back of the steering remote control.
2) Remove the insulation thin tag together with the lithium
battery.
3) Insert the lithium battery (I) back with the positive poles (+)
side facing up.
4) Put the cover back to the steering wheel remote control.
Replacing the lithium battery:
Use a CR2032 (3V) lithium battery only.
Never use other types of battery with this remote
•
Open the cover on the back of the remote control
•
Replace the lithium battery in the unit using a non-
metallic with a cuspidal object.
CAUTION
•
Installation of this unit requires specialized skills and
experience. Installation of this unit should be entrusted to a
dealer from whom you purchased this unit.
•
Install this unit using only the parts supplied with this unit. If
other parts are used, this unit may be damaged or could
dismount itself, which leads to an accident or trouble.
•
Install this unit as required by this manual. Failure to do so
may cause an accident.
•
Do not install this unit near the doors where rainwater is likely
to be spilled on the unit. incursion of water into the unit
may cause smoke or fire.
WARNING
•
Avoid installing this unit in such a location where the operation
of safety devices such as airbags is prevented by this unit.
Otherwise, there is a danger of a fatal accident.
•
Avoid installing this unit in such a location where the operation
of the steering wheel and the gearshift lever may be prevented.
Otherwise, it may result in a traffic accident.
Notes
•
Do not install this unit in such a place as may obstruct the
drive's view.
•
Since interior layout differs depending on the type of vehicle,
the ideal installation location for the unit also differs. When
installing the unit, select a location that assures optimum
transmission of signals from the steering remote control to
the car stereo.
6
5
2
4
3
1
DN
MU
UP
TRACK
TUNE/
AMS
A.P.
MOD
MUTE
MODE
VO
L
U
M
E
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
WARNING
•
Fix this unit securely to the steering
wheel with the belt attached to the
unit. If this unit is loose, it disturbs
driving stability, which may result in
a traffic accident.
•
Do not attach this unit to the outer
circumference of the steering wheel
(Fig. A). Otherwise, it disturbs
driving stability, causing a traffic
accident. Always attach this unit to
the inner circumference of the
steering wheel as shown. (Fig. B)
FIG. B
FIG. A
Page 9
2
1
F
E
D
B
A
C
FIG. 3
FIG. 2
FIG. 1
FIG. 4
FIG. 6
FIG. 5
WARNING
•
Do not recharge, disassemble, heat or dispose of the battery in a fire.
•
Do not handle the battery with metallic tools.
•
Do not store the lithium battery with metallic materials.
•
When disposing of used batteries, please comply with governmental regulations or
environmental public institution's rules that apply in your country.
•
Always check carefully that you are loading the battery with its positive pole (+) loading the
battery with its positive pole (+) side facing up.
•
Keep the lithium battery out of the reach of children. Should the battery be swallowed,
immediately consult a doctor.
Installing Remote Control on a Right-Hand Drive Car
Note:
When the remote control is installed on a left-hand drive car,the horizontal positions are inverted.
1). Secure inner holder (A) to the inner circumference of the steering wheel (C) with belt (B). (Fig. 1)
Fit the inner holder to the steering wheel so that the arrow-marked side faces the driver as shown.
2). Cut the extra portion of the belt at the center of the inner holder. (Fig. 2)
3). Install outer holder (D) on the inner holder and secure with screws (E). (Fig. 3)
4). Install the remote control unit in the holder. (Fig. 4 & Fig. 5)
Removing Remote Control from the holder
•
When removing the remote control unit from the holder, move the corrugated release section (F)
toward the steering wheel and slide the remote control unit toward you. (Fig. 6)
