P-18
initial emptying and vigorously shake out dust and debris.
3. Wash the bag once a year or more often if needed.;
a. Remove the vacuum bag.
b. Turn bag inside out.
c. Hang up
d. Hose down thoroughly.
e. Hang to dry.
f. Turn bag right-side out and reinstall.
STORAGE
■
Allow the engine to cool before storing.
■
Store the unit locked up to prevent unauthorized use or damage.
■
Store the unit in a dry. Well ventilated area.
■
Store the unit out of the reach of children. .
LONG TERM STORAGE
If the unit will be stored for an extended time:
1. Drain all petrol from the petrol tank into a container. Do not use petrol that has been stored for more
than 60 days. Dispose of the old petrol in accordance to local regulations.
2. Start the engine and allow it to run until it stalls. This ensures that all petrol has been drained from
the carburetor.
3. Allow the engine to cool. Remove the spark plug and put 1 oz(30 ml) of high quality motor oil into the
cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the spark plug.
NOTE: Remove the spark plug and drain all of the oil from the cylinder before attempting to star the
blower/vacuum after storage.
4. Thoroughly clean the unit and inspect for any loose or damaged parts. Repair or replace damaged
parts and tighten loose screws. Nuts or bolts. The unit is ready for storage.
TRANSPORTING
■
Allow the engine to cool before transporting.
■
Secure the unit while transporting.
■
Drain the petrol tank before transporting.
■
Tighten petrol cap before transporting.
Содержание MAS-4771G
Страница 18: ......
Страница 28: ...P 9 39 Starter Rope 43 Choke lever 40 Change over lever 44 Screws 41 Vacuum Mode 45 Air Filter 42 Blower Mode ...
Страница 39: ...P 20 ...