Premier MAS-4771G, Инструкция по эксплуатации

Страница: 30 / 39

P-11
INSTALLING AND ADJUSTING THE SHOULDER HARNESS
NOTE: have the shoulder harness and adjusted (but not clipped to the support fitting) prior to starting
unit.
1. Push the strap through the center of the buckle.
2. Pull the strap over the cross bar and down through the slot in the buckle(Fig. 6)
3. fully extend the harness
4. attach the metal clip of the shoulder harness to the support fitting on top of the handle (Fig. 7)
5. Place the harness over your head and onto your shoulder (Fig.8)
6. While standing in the operating position (Fig. 8) .adjust length to fit the operator’s size.
■
Lengthen the harness by pulling down on the strap and lifting the buckle and up (Fig. 9)
■ Shorten the harness by pulling the strap back. Through the buckle while holding the buckle (Fig. 9)
OIL AND PETROL INFORMATION
Oil and/or improperly mixed petrol are usually the main reasons for the unit not running properly. Be sure
to use fresh. Clean petrol and follow the instructions carefully for the proper petrol/oil mixture.
RECOMMENDED OIL TYPE
Use a high quality synthetic oil formulated for use in 2-cycle. Air-cooled engines
RECOMMENDED PETROL TYPE
Always use clean, fresh, unleaded petrol (gasoline) that is less than 60 days old.
WARNNING: Petrol (gasoline) is extremely flammable and its vapors can explode if they are
ignited. Always stop the engine and allow it to cool before filling the petrol tank, do not smoke while filling
the tank, keep sparks and open flames away from the area.
OIL AND PETROL MIXING INSTRUCTIONS
Thoroughly mix 5 liters of unleaded petrol(gasoline) with 167ml of 2 cycle engine synthetic oil in a
separate petrol can (40:1=2.5%). Do not mix them directly in the engine petrol tank.
STARTING/STOPPING INSTRUCTIONS