background image

Contents

Important Information ···················· 2
1. Safety ··································· 4

1.1 Warnings ·······································4
1.2  General Precautions ························6
1.3  Safety Devices and Protective Guard ······ 12
1.4  Protective Equipment ····················· 13
1.5 Noise ·········································· 13
1.6 Vibration ······································ 13

2. Outline ·································14

2.1  Name of Parts and Their Functions ·····14
2.2  Specification ································ 15
2.3  Attached Material ································ 15
2.4  Position of Model Code and Serial No. ·· 15
2.5 Consumables ··································· 16

3.  Installation and Adjustment ··········17

3.1  Installation Method ························ 17

4. Operation ·····························20

4.1  Transporting method ······················ 20
4.2  Pre-operation Check ······················ 22
4.3  Start and Stop ······························ 23
4.4  Precautions for Operation ··············· 24
4.5 

Examples of Use ··························· 25

4.6  Actions after Operation ··················· 26

5. Maintenance ·························27

5.1  Maintenance of Blower ··················· 27
5.2  Tightening method of nut ················ 27
5.3  Removing procedure for foreign  
 

objects inside ······························· 28

5.4 Greasing ····································· 29

6. Storing ·································30
7.  Waste Disposal ······················32
8. Troubleshooting ·····················33
9.  Service after Sales ·················34
10. Technical data  ·······················35

EC Declaration of Conformity
              (Applies to Europe only)

 ·····36

Copyright (C) 2012 NIKKARI Co., Ltd. All Rights Reserved

For Safe Use of Blower Attachment

 

● Be sure to read this manual and the powerhead 

(separately sold) manual to have a good understanding 
of the contents before handling the blower.

 

● If there is no powerhead manual, purchase it from 

sales agency.

 

● Keep this manual and the powerhead manual carefully 

in a readily accessible location.

Blower Attachment

SSBL

Instruction Manual

Original Instruction

Summary of Contents for SSBL





































Reviews: