Premier 2-10-4 TEXAS STEAM ENGINE Скачать руководство пользователя | Manualshive

Страница: 1 / 24

background image

PREMIER 2-10-4 TEXAS

STEAM ENGINE

OPERATING INSTRUCTIONS

This Premier 2-10-4 Texas Steam Engine features a die-cast boiler and tender and
operates on O-72 track. This Premier Steam Engine contains state-of-the-art electronics
with many built-in automatic features for incredibly realistic operation. Despite these
advanced features, the locomotive is easy to operate on an O-72 layout with any
compatible standard AC transformer that is equipped with whistle and bell buttons (see
the compatibility chart on page 20), and is compatible with most other 3-rail locomotives,
rolling stock, and accessories.

This locomotive is equipped with Proto-Sound 2.0 with Digital Command System (DCS).
This new system will allow you to operate your locomotive in Command mode (when
used with the DCS Remote Control System, sold separately) or Conventional mode.
Conventional operating features are described in the following pages, while the

DCS

operating features are covered in the set of operating instructions that accompanies
the DCS equipment.

Conventional Mode operation of this locomotive is much simpler

than operation of original Proto-Sound engines. For your own safety and that of your
equipment, please read the instructions before you operate this engine.

1
2
3
...
»

Содержание 2-10-4 TEXAS STEAM ENGINE

























Отзывы:

Нет отзывов

Похожие инструкции для 2-10-4 TEXAS STEAM ENGINE

Бренд: JetCat Страницы: 54

Бренд: Saab Страницы: 30

Бренд: vario helicopter Страницы: 4

HOME MOTION Roll Up 28 WT

Бренд: SOMFY Страницы: 10

Бренд: Nissei Страницы: 16

Бренд: VDG Страницы: 18

Бренд: YARDMAX Страницы: 25

7-1/2 HP 212cc OHV

Бренд: Power Fist Страницы: 52

Бренд: NEUGART Страницы: 2

Бренд: NEUGART Страницы: 2

Бренд: Clinton Страницы: 7

Бренд: O.S. engine Страницы: 18

Revenge CTM Series

Бренд: Absima Страницы: 3

Бренд: HIFEI Technology Страницы: 2

Бренд: Wilesco Страницы: 4

Бренд: TOHATSU Страницы: 87

Бренд: Pratt & Whitney Страницы: 576

Бренд: Rockwell Automation Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды