PREMIER WINCH DV-12 light, Руководство пользователя

Страница: 6 / 21

6

How the winch is rated.
Load and speed vary according to how
much wire rope is on the drum. The first
layer of rope on the drum delivers the
slowest speed and the maximum
load. A full drum delivers the maximum
speed and the minimum load. For this
reason, winches are rated on their performance
first layer of rope.
III.Installation
Before using the winch, make sure all electrical components have no corrosion or damage; the
environment should be clean and dry. Voltage drop from the battery connections to the winch must
not exceed 10% of the nominal voltage under normal operating condition.

Mounting
1. It is very important that the winch be
mounted on a flat and hard surface in order
to make sure the motor, drum and
gearbox housing are aligned correctly.
2. It is recommended that you use a
mounting channel to prevent from
damaging winch or vehicle.
3.
It is also recommended that the roller fairlead must be fitted to prevent excessive wear of the
wire rope.
4. Tighten all mounting nuts on motor and roller fairlead securely.

Battery cable connection
Battery cable specification:
Model DV-6000S DV-9000ES / DV-12 light DV-9000i DV-12000ES DV-15000ES
Control Type Detachable control box Bridge control box Detachable control box
Volt 12V or 24V
Red cable: 4AWG X 1.83m/72” Red cable: 2AWG X 1.83m/72” Red cable: 2AWG X 1.83m/72”
Black cable: 4AWG X 1.8m/70”
Black cable: 2AWG X 1.8m/70”
Black cable: 2AWG X 1.8m/70”
1. Attach the black cable (earth) firmly to the chassis of the vehicle or to the negative
–
battery
terminal.
2. Attach the red cable to the circuit breaker, connect the other end to the positive + battery
terminal.
3. The circuit breaker must be fitted.
DV- 6000S/9000ES/12 light
12000ES/15000ES
DV- 9000i