+1 (866) 381-2785
14
To Cross Hard Surfaces (driveways, sidewalks, etc.)
Follow all safety instructions for your power tools. Be sure to always wear your safety goggles.
•
Concrete Driveway or Sidewalk (
7C
): Place the boundary wire in a convenient expansion joint or create
a groove using a circular saw and masonry blade. Place the boundary wire in the groove and cover
with an appropriate waterproofing compound. For best results, brush away dirt or other debris before
patching.
•
Gravel or Dirt Driveway (
7D
): Place the boundary wire in a PVC pipe or water hose to protect the
boundary wire before burying
7C
7D
Place the Boundary Flags
The boundary flags are visual reminders for your pet of where the warning zone is located.
1. Place the test light contacts on the contact points and hold the receiver collar at your pet’s neck height.
2. Walk towards the warning zone until the receiver collar beeps (
8A
).
3. Place a boundary flag in the ground (
8B
).
4. Walk back into the pet area until the beeping stops.
5. Repeat this process around the warning zone until it is marked with boundary flags every 10 ft.
Note: If you cannot hear the beep, see the test light instructions.
To prevent an unintended correction, after the boundary flags have been placed, be sure to set the static correction on the
receiver collar back to level 1 Tone only.
8A
8B
Fit the Receiver Collar
Important: The proper fit and placement of your receiver collar is important for effective training.
The contact points must have direct contact with your pet’s skin on the underside of his neck.
Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long
or made too tight on the pet’s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is
commonly known as bed sores.
To assure a proper fit, please follow these steps:
1. Make sure that the battery is not installed in the receiver collar.
2. Start with your pet standing comfortably.
3. Place the receiver collar on your pet so that the Premier Pet
™
logo is facing your pet’s chin.
