PTM / PTM-B
Page 8
Visit the Premier Mounts website at http://www.mounts.com
Installation
Instructions
Installing the Wall Plate (cont’d)
Place the wall plate against the wall in the desired
viewing location.
Level the wall plate.
Use a pencil and mark all four (4) mounting locations
where you will be drilling holes for the concrete wedge
anchors.
Set the wall plate to one side in a safe location.
Step 1
Use a power drill and
5
/
16
″
concrete drill bit to drill a hole at
each of the marks.
Step 2
Step 3
Insert a concrete wedge anchor into each hole.
If necessary, lightly tap each concrete wedge anchor
into place with a hammer.
Remove the nuts and washers from all four (4)
concrete wedge anchors.
