Premier Mounts PTM, Руководство по установке

Страница: 10 / 14

PTM / PTM-B
Page 10
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
Mounting Hardware (cont’d)
Universal Spacer Installation
Premier Mounts’ Universal Spacers allow you to attach
the mounting bracket to fl at panels which have recessed
or uneven mounting points. Each Universal Spacer adds
¼ ˝ to the distance between the Adapter Plate and your
fl at panel.
The Universal Spacers must be stacked and oriented
as shown.
The Universal Spacers must only be installed
between the Adapter Plate and your fl at panel.
The Universal Spacers will fi t M4, M5, M6 and M8 screw
sizes.
Does your fl at panel have:
●
75mm x 75mm VESA mounting points or
100mm x 100mm VESA mounting points?
Proceed to the
“Attaching the Flat Panel to
the Mount”
section.
●
100mm x 200mm mounting points or 200mm x
200mm mounting points?
Proceed to the
“UFP-280 Adapter Plate
Installation”
section.
UFP-280 Adapter Plate Installation
The UFP-280 LCD Mount Adapter is used attach fl at
panels with 100mm X 200mm and 200mm x 200mm
mounting points to the PTM mount.
 
Determine which mounting points will be used.
Refer to the
“Technical Specifi cations”
section for
UFP-280 Adapter Plate mounting points.
  Place your monitor face-down on a soft and fl at
surface.
 
Secure the UFP-280 Adapter Plate to the back of the
monitor using the following hardware:
•
If you are using the 200mm X 100mm mounting
points, you must use the M4 x 10mm Phillips fl at head
screws to secure the UFP-280 Adapter Plate to the
fl at panel.
•
If you are using the 200mm x 200mm mounting
points...
...and you selected M4 screws from the
“Selecting
the Mounting Hardware”
section, you must also use
M4 fl at washers.
...and you selected M5 screws from the
“Selecting
the Mounting Hardware”
section, you must also use
M5 fl at washers.
Proceed to the
“Attaching the Flat Panel to the Mount”
section.