manualshive.com logo in svg

Premier Mounts PRF, Руководство по установке

Поделиться
Скачать
Premier Mounts PRF Скачать руководство пользователя страница 11

PRF

Installation Instructions 

Page 11

Attaching the UFP-280 Adapter Plate

200mm x 100mm Pattern

  

If you have a recessed mounting pattern, use 
the universal spacers to compensate for the 
indentation.

Attach the VESA Adapter Plate to the back of the 
fl at panel using the appropriate mounting hardware.

 

200mm x 100mm Mounting Pattern 

Installation

If using a 200mm x 100mm mounting pattern
to attach the PRF to your fl at panel,
please use six (6) 

M4 Flat head

 screws. Using

rounded combo screws for the 
200mm x 100mm VESA plate may damage
your fl at panel.

Mounting 

Hardware

Universal 

Spacer

Adapter 

Plate

Flat 

Panel

200mm x 200mm Pattern

  

If you have a recessed mounting pattern, use 
the universal spacers to compensate for the 
indentation.

Attach the VESA Adapter Plate to the back of the 
fl at panel using the appropriate mounting hardware.

Mounting 

Hardware

Universal 

Spacer

Adapter 

Plate

Flat 

Panel

 

 If your fl at panel has a 200mm x 100mm or 
200mm x 200mm mounting pattern, the VESA 
Adapter Plate must be used. Please refer to the 
VESA Adapter Plate Pattern to determine the 
appropriate mount placement.

Содержание PRF














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды