background image

Installation 

Instructions 

           Page 

3

THE STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE DISPLAY AND 
LIFT. IF NOT, THE STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED 
SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO 
DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.
DO NOT PLACE DISPLAYS WEIGHING MORE THAN 175LBS. ON THIS MOUNT. IF THIS WEIGHT IS EXCEEDED, DAMAGE TO 
THE MOUNT AND/OR LIFT UNIT MAY OCCUR.

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND 
COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND 
PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE 
REFERENCE.

Warning Statements

Indicates that the power plug is to be disconnected 
from the power outlet.

Safety precautions must be taken at all times.

Warning and Caution statements.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the flat panel 
display and/or damage to the mounting surface.

Do not install next to any high heat sources. Failure to do so may result in damage to the flat panel display and could increase the risk of 
fire.

Contact Premier Mounts with any questions.

In the interest of safety, it is recommended that two perform this installation. Injury and/or damage can result from dropping or mishandling 
the flat panel display.

If there is visible damage to the product, it must not be 
installed.

This unit is not intended for use by young children of 
infirm persons without supervision.

Young children should be supervised to ensure that they 
do not play with the unit.

Preface

We are delighted that you have chosen a product from Premier Mounts. Premier Mounts mounting systems are high-tech products that 
are based on many years of experience in the manufacture and development plasma displays, LCD diplays and projector mounts. We are 
also constantly improving our products to meet our family of customers particular requirements.

These installation instructions will assist and direct you in how to assemble, install and utilize your flat panel lift system.

We are sure that your display lift system will give you many years of problem-free operation. Before our products leave the factory they 
undergo full function and quality testing. Should you, nevertheless, experience problems with your system, you are always welcome to 
contact our Customer Service department.

Premier Mounts provides a warranty on all of our products. This warranty, however, is subject to correct use in accordance with the 
specifications and procedures as set forth in the manual. Maintenance and repairs must be done by a certified technician.

Changes in installation and use of Premier Mounts products can affect their operation and durability. Changes must therefore only be 
made at your own risk.

PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS 
PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED 
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, 
ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER 
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

L180F

Содержание L180F



















Отзывы: