GB-INWAVP
Installation Instructions
Visit Premier Mounts website at http://www.mounts.com
Page
9
Insert your GB-INWAVP into the cutout.
Step 5
If you will be routing your audio, video, and/or data
connections through the wall, remove the 1½
″
knockout.
The 1½
″
knockout is easily removed by pressing hard
with your thumbs on either side of the knockout, then
twisting the knockout until it comes free.
Watch for sharp edges!
Step 4
Wood Stud Installation (Optional) (cont’d)
Drill a ¼
″
pilot hole in each of the three (3) mounting
points.
Insert one (1) commercially available wood screw into
each of the pilot holes and hand tighten.
Do not overtighten the wood screws.
Do not use a power drill to thread in the wood
screws.
Proceed to the
“Outlet Box Installation”
section.
Step 6
1½
″
Knockouts for
Audio / Video / Data
Connections
