GB-INWAVP
Installation Instructions
Visit Premier Mounts website at http://www.mounts.com
Page
5
Introduction
Your GB-INWAVP requires a minimum of
¾
″
between the side of your GB-INWAVP and the
nearest wall stud for the In-Wall Clamps to properly
operate.
Prior to installing any hardware, Premier Mounts strongly
recommends that you carefully consider:
•
Where you intend to mount your
fl
at panel.
•
Where you intend to install your GB-INWAVP.
•
Whether you will be mounting your GB-INWAVP
horizontally, vertically, or inverted.
•
The proximity of nearby wood studs.
•
How electric power, audio, video, or data is going to be
routed to your GB-INWAVP.
Installation of your GB-INWAVP should be
performed by a quali
fi
ed professional. Improper
installation can result in property damage and
severe personal injury.
If you will be mounting your GB-INWAVP directly to
drywall, proceed to the
“Drywall Installation”
section.
If you will be mounting your GB-INWAVP to a wooden
stud, or if after cutting the hole in your drywall you
discover that you are too close to a wall stud, proceed to
the
“Wood Stud Installation (Optional)”
section.
Plan View
Wood
Stud
Wood
Stud
¾
″
or Greater Distance
Drywall Installation
Step 1
Use an electronic stud
fi
nder to locate all wall studs in
the area in which you intend to install your
fl
at panel
and your GB-INWAVP.
Use a pencil and lightly mark the location of each
stud.
If your
fl
at panel mounting bracket has suf
fi
ciently large
access openings, consider installing your GB-INWAVP
directly behind the
fl
at panel.
