Premier Mounts ECM-3763Q, Руководство по установке

Страница: 10 / 13

ECM-3763Q
Page 10 Installation Instructions
Attaching the Flat Panel
Install the mount according to the instructions
provided by Premier Mounts. Ensure all structural
reinforcements have been made before attaching
the
fl at panel to the ECM-3763Q.
Do not release the fl at panel until the mounting
bracket arms are fully resting on the elliptical
mounting bar.
 
Raise the mounting bracket arms and the
attached fl at panel over the elliptical mounting bar
of the ECM-3763Q
)LJXUH
.

Lower and center the mounting bracket arms with
the attached fl at panel onto the elliptical mounting
bar of the ECM-3763Q
)LJXUH
.

Repeat Steps 1 and 2 for mounting the remaining
elliptical tilt mounts.
Do not release the fl at panel until the mounting
bracket arms are resting fully on the elliptical
mounting bar.
Displays should be installed opposite of each other to
even out the weight (Figure 3).
Proceed to
“Attaching the Decorative Covers”
section.
Arms Elliptical Mounting Bar Mounting Bracke
t
*AST-2446 ceiling adapter shown for illustration purposes only.
1st
4th 3rd
2nd
Top view of ECM-3763Q with
flat-panels
Figure 3
Figure 1
Figure 2
*AST-2446 ceiling adapter shown for illustration purposes only.