ECM-3763D
Installation Instructions
Page 11
Attaching Decorative Covers
Decorative
Cover
Place
the
fi
rst decorative cover over the
fi
rst
mounting bracket arm and push
fi
rmly into place.
Align the mounting holes together.
Insert and tighten the M4 x 6mm Phillips screw
(smaller mounting hole).
Insert and tighten the M6 x 25mm Phillips screw
(larger mounting hole).
Repeat steps 1 through 4 for the second
decorative cover and mounting bracket arm.
Mounting
Bracket
Arm
When attaching the decorative covers, verify
that the smaller mounting hole is above the
larger mounting hole.
M4 x 6mm Screw
Screwdriver
M6 x 25mm
Screw
Do not over-tighten these screws.
Proceed to
“Cable Management”
section.
Cable Management
Route the cables through the cable access holes and to
their respective locations.
The cables must then be routed through the coupler, up
the ceiling adapter (not included) and into the ceiling to
a pre-determined power source.
Proceed to
“Tilt Positioning”
section.
Source or
A/V Cable
To Ceiling
Ceiling Adapter
Coupler
