ECM-3763D
Page 10
Installation Instructions
Flat Panel Installation
Do not release the
fl
at panel until the mounting
bracket arms are fully resting on the elliptical
mounting bar.
Perform all structural reinforcements before
attaching the
fl
at panel to the ceiling mount.
Raise the mounting bracket arms and the
attached
fl
at panel over the elliptical mounting bar
of the ECM-3763D.
Lower and center the mounting bracket arms with
the
attached
fl
at panel onto the elliptical mounting
bar of the ECM-3763D.
Repeat steps 1 and 2 for mounting the second
elliptical tilt mount.
Mounting Bracket Arms
Elliptical Mounting Bar
Do not release the
fl
at panel until the mounting
bracket arms are resting fully on the elliptical
mounting bar.
Proceed to
“Attaching the Decorative Covers”
section.
Depending on your installation, it may be easier
to route all cables prior to attaching the
fl
at panel
(see “
Cable Management
” section).
