CTM-MS3-1
3.
Install the nylon spacers (if needed) to the mounting points on the flat panel (Figure 6).
4.
Lay the left and right mounting brackets (stamped arrows facing out) - (Figure 7).
Figure 6
Figure 7
Nylon Spacers, If Applicable
Inverted Flat Panel
Mounting Brackets
Bottom of Flat Panel
Arrows Facing Out
Center Mark
5.
Match the center of viewing guide with the centerline you marked in Step 1 (Figure 8).
6.
The mounting brackets are designed with a center of viewing guide on the outside (Figure 9).
Page 10
Installation Manual