S3629
D
Step 4
Remove the red, wooden end cap and spacer from
the propeller axle exiting from the front end of the
fuselage. Slide on the Spinner Propeller. Place the
Spinner Propeller onto the propeller axle, then
replace the spacer and the end cap. (diagram F)
Step 5
Pound Ground Stake into ground and insert
non-ferruled end of Support Pole into Ground
Stake. Insert Upper Pole Section of completed
P-40 Warhawk Spinner into ferrule on top of
Support Pole. (diagram G)
Stabilizer
Strut
Internal Fuselage
Strut
Fuselage
Stabilizer
Hole
E
Step 3
Insert the Stabilizer Strut into the Stabilizer
Sleeves located underneath the stabilizer. Guide
the Stabilizer Strut through the Fuselage
Stabilizer Hole and to the other side. Then slide
the Stabilizer Strut through the other sleeve on
the other side of the stabilizer. (diagram E)
You may have to shift the Fuselage Stabilizer
Hole slightly to line up the stabilizer strut
through the hole. Shifting the Fuselage Stabilizer
Hole can be accomplished by grabbing the main
fuselage hub and moving the internal fuselage
strut.
PLEASE NOTE: Although your Airplane Spinner is
constructed with UV resistant SunTex
TM
fabric, it is
recommended that you take it inside during storms
and harsh weather to preserve its durability.
G
Support Pole
Ground Stake
H
S9
S3629
Stabilizer
Sleeve
Hidden
Opening
F
Main
Fuselage
Hub
H
S9
S3629
S9
