Step 7
Slide the Spinner Axles onto the Wheel Strut
Assemblies. Tighten Knobs on the “T” Joints
to hold the axles to the Struts. (Diagram D)
Step 8
Take one of the four Spinner Wheels and
slide it on to one of the two Spinner Axles.
Slide second Spinner Wheel onto Spinner
Axle. (Note: Spinner Wheels on same side of
the Golf cart should spin in same direction
and Spinner Wheels on same axle should
spin in opposite directions. Before putting
second Axle Cap into place make sure
wheels spin as shown in diagrams E and F.)
Pound second Axle Cap onto uncapped end
of Spinner Axle using a mallet or piece of
wood. (Diagram E)
Step 9
Drive Ground Stake into ground and insert
the non-ferruled end of the Lower Support
Pole into the Ground Stake. Insert Upper
Pole of assembled Spinner into the ferrule.
(Diagram F)
PLEASE NOTE: It is
recommended that you
take your Golf Cart
Spinner inside during
storms and harsh weather
to preserve its durability.
D
E
F
First, slide Spinner
Axle onto Strut
Assembly
Upper Support Pole
Lower Support Pole
Ground Stake
Ferrule
Second, tighten
knob on “T” Joint
Spinner Axle
Spinner
Wheel
Slide Spinner
Wheels onto
Spinner Axle
Wheels on same
axle should
spin in opposite
directions
Then hammer
Axle Cap
onto end
“T” Joint
