A. IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS
PRODUCT.
Use this heater only as described in this manual. Any other use not recommended
by the manufacturer may cause a fire or electrical shock.
When using electrical appliances, basic safety precautions should always be
followed:
1.
Before operating the heater remove the unit from its packaging and check it is in
good condition.
2.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Always use handles when moving this heater. Keep flammable
material, such as furniture, pillows, bedding, papers, clothes and curtains at
least 3 foot (0.9 m) from the front of the heater and at least 1 feet (0.3 m) away
from the sides and rear.
3.
The surfaces of this heater are hot whilst in operation. Always allow a cool down
period before moving it to another location. Keep all flammable materials well
away from the heater.
4.
In order to avoid overheating, DO NOT COVER the heater.
5. Extreme caution is necessary when any heater is used by or near children or
pets and whenever the heater is left operating and unattended.
6.
Always unplug heater when not in use.
7.
Do not operate any heater with a damaged cord or plug, after the heater
malfunctions, has been dropped or damaged in any manner. Return the heater
to an authorised service facility for examination and repair.
8.
Do not use outdoors. This heater is not intended for use in wet or damp locations.
N ever locate heater where it may fall into a bathtub or other water container.
9.
Do not run cord under carpeting. Do not cover cord with rugs or runners. Arrange
cord away from an area where it may be tripped over. Do not use this heater with
a programmer, timer or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
10. To disconnect heater, turn switches to the off position and remove plug from the
power socket. Pull only by the plug. Never pull on the cord.
11. Do not place the heater on soft surfaces. Always place on a flat level surface.
12. Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
13. Do not insert or allow objects to enter any ventilation or exhaust opening as this
may cause an electric shock or fire, or damage the heater.
14. A heater has hot and arcing or sparking parts inside. It must not be used in
potentially dangerous locations such as flammable, explosive, chemical-laden
or wet atmosphere
15. Do not let children play with the packaging, for example plastic bags.
16. Check the household voltage to ensure it matches the appliance's rating
plate specification.
17. Avoid the use of an extension cord as it could overheat and cause a fire.
READ & SAVE THESE IMPORTANT INSTRUCTIONS
B. BS PLUG WIRING
Wiring Instructions: Should it be necessary to change the plug please
note the wires in the mains lead are coloured in accordance with the
following code:
BLUE - NEUTRAL
BROWN - LIVE
GREEN AND YELLOW - EARTH
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
1. The
BLUE
wire is the
NEUTRAL
and must be connected to the terminal
which is marked with the letter
N
or coloured
BLACK
.
2. The
BROWN
wire is the
LIVE
and must be connected to the terminal which
is marked with the letter
L
or coloured
RED.
3. The
GREEN/YELLOW
is the
EARTH
and must be connected to the
terminal which is marked with the letter
E
or or coloured
GREEN OR
GREEN/YELLOW
.
4. Always ensure that the cord grip is positioned and fastened correctly.
If a
13A (BS 1363)
fused plug is used it must be fitted with a
13A
fuse. If in
doubt consult a qualified electrician.
Wiring for a 13 Amp Plug (BS1363)
Please note. The Earth Terminal is marked with the letter
E
or Earth Symbol
