Page 19
5. Clock Time settings: HR and MIN
To set the hours, press HR button once, the time will add 1 hour, continue to
press this button, the clock will add by 1 hour until extended 11 hours, then
will change to PM or AM and return to 0(12:00).
To set the minutes, press MIN button once, the clock will add 1 minute,
continue to press this button and the clock will add by 1 minute until
extended to 59 minutes, the return 00.
TO RESET ALL FUNCTIONS ON THE REMOTE CONTROL, PLEASE
RE-INSERT THE BATTERIES.
REMOTE CONTROL FUNCTIONS
1. ON/OFF –Starts or
Stops the Unit.
2.
▲
WARM
WARMER-
Adjust to desired warm
temperature.
3.
▼
COOL
COOLER –
Adjust to desired cool
temperature.
4. MODE – Select the
functions of the unit for:
Auto Mode, Cooling Mode,
Dehumidifying Mode, Fan
Mode and Heating Mode.
5. FAN – Select the fan
speed desired:High
Medium
Low
6. SLEEP –To set the unit for sleep mode.
7. **SWING – To start swinging air louvers vertically by press SWING
button once. To stop, press the SWING button again. Horizontal air flow
direction can be adjusted manually.
Attention: SWING feature only for swing louvre. If you model is equipped
the FIXED HEAD (A2) outlet. You can manually adjust the louvre
direction
8. TIME ON – To program the timer, press TIME button until the LED display
shows a flashing
,to set automatic ON time while the unit is ready.
9. TIME OFF – Press TIME button and the LED display will show a flashing
, to set automatic OFF time while the unit is running.
10. HR–Press to set the desired hour setting.
11. MIN–Press to set the desired minute setting.
NOTE: ALL SETTINGS CAN BE VIEWED ON THE REMOTE DISPLAY
