IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
BEFORE USE
You must inspect the product including its cable and plug for
any signs of damage. If the product is damaged, DO NOT
use it, and contact your supplier immediately.
INSTALLATION
Attach one braked castor and one unbraked castor to each
foot, using the M6 nut and washer provided.
Turn the main body of the heater upside-down and attach the
foot assemblies (complete with castors) to the underside of
the heater, using the M6x45mm screws provided. The braked
castors should both be at the back of the heater.
Return the heater to the upright position.
Attach the handle to the sides of the main body of the heater
using the M6x45mm screws provided, ensuring that the
handle is to the back of the heater.
PRODUCT SAFETY
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance
Page 2
