background image

Page 18

For technical questions, please call 1-800-520-0882.

ITEM 69727 / 69730

Warranties

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, 

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the 

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, 

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper 

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries 

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of 

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges 

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. 

If our inspection verifies the defect, we will either repair or replace the product at our election or we may 

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will 

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted 

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Emission Control System Warranty

California and United States Emission Control 

Defects Warranty Statement 

(for Model 68727)

The California Air Resources Board (herein CARB), the 

United States Environmental Protection Agency (herein EPA), and 

Harbor Freight Tools (herein HFT) are pleased to explain the emission 

control system warranty on your 2014-2015 Small Off-Road Engine 

(herein engine). In California, the engine must be designed, built and 

equipped to meet the State’s stringent anti-smog standards.  Elsewhere 

within the United States, new off-road, spark-ignition engines certified 

for model year 2014-2015, must meet similar standards set forth by 

the EPA.  HFT must warrant the emission control system on your 

engine for the periods of time described below, provided there has 

been no abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts 

such as the carburetor or fuel-injection system, and 

the ignition system. Also included may be hoses, belts, 

connectors and other emission-related assemblies.

Where a warrantable condition exists, HFT will repair your 

engine at no cost to you including diagnosis, parts and labor.

United States Emission Control Defects  

Warranty Statement  

(for Model 68730)

The United States Environmental Protection Agency (herein EPA) 

and Harbor Freight Tools (herein HFT) are pleased to explain the 

emission control system warranty on your 2014-2015 Small Off-Road 

Engine (herein engine).  Within the United States, new off-road, spark-

ignition engines certified for model year 2014-2015 and later, must be 

designed, built and equipped to meet the stringent anti-smog standards 

set forth by the EPA.  HFT must warrant the emission control system 

on your engine for the periods of time described below, provided there 

has been no abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts such as 

the carburetor or fuel-injection system, and the ignition system. 

Also included may be hoses, belts, connectors and other 

emission-related assemblies.

Where a warrantable condition exists, HFT will repair your engine 

at no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage

The 2014-2015 and later engines are warranted for two (2) years.   

If any emission-related part on your engine is defective, 

the part will be repaired or replaced by HFT.

Harbor Freight Tools Emission Control 

Defects Warranty Coverage

Engines are warranted for a period of two (2) years relative 

to emission control parts defects, subject to the provisions 

set forth below. If any emission related part on your engine is 

defective, the part will be repaired or replaced by HFT.

 

Owner’s Warranty Responsibilities

•   As the engine owner, you are responsible for the performance 

of the required maintenance listed in your Owner’s Manual. 

HFT recommends that you retain all receipts covering 

maintenance on your engine, but HFT cannot deny warranty 

solely for the lack of receipts or for your failure to ensure 

the performance of all scheduled maintenance.

•   As the engine owner, you should, however, be aware 

that HFT may deny you warranty coverage if your engine 

or a part has failed due to abuse, neglect, improper 

maintenance, or unapproved modifications.

•   You are responsible for shipping your engine to a HFT warranty 

station as soon as a problem exists.  Contact the HFT Customer 

Service department at the number below to make shipping 

arrangements.  The warranty repairs should be completed 

in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty 

rights and responsibilities, you should contact the 

Harbor Freight Tools Customer Service Department at 1-800-520-0882.

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Содержание 69727

























Отзывы: