Vitality Series Selectorized Line Abdominal / Back Extension Assembly Guide: Assemble the Equipment
6
6.
Secure the movement arm and the pillow-block bearing to the cam support
plate using:
2 - M12 x 40 mm hex head bolts (secured on the side opposite the
pillow-block bearing)
2 - Barrel spacers (fit into mounting holes on pillow-block bearing)
4 - 13 mm flat washers
2 - M12 nylon lock nuts (secured on the pillow-block bearing side)
Note:
If necessary, rotate the axle until its keyed end fits into the hole in the
cam support plate.
7.
Secure the movement arm and the cam support plate to the pivot support
tube using:
2 – M10 x 25 mm flat head cap screws
2 – Aluminum caps
8.
Using a long hex wrench, tighten the two set screws on the pillow-block
bearing attached to the cam support plate.
9.
Align the cam cover as follows:
— It is positioned along the inside of the cam support plate.
— Its two mounting holes line up with the two mounting holes near the top
edge of the cam support plate.
— Once installed, its recessed end fits snugly against the weight tower
upright.
— Once installed, its curved portion extends over the movement arm
cable.
Attach the cam cover to the cam support plate using:
2 – M8 x 25mm hex head bolts
2 – 9 mm flat washers
Figure 5: Movement arm attachment
Figure 6: Cam support plate attachment
Содержание Vitality Selectorized C028ES
