©2019 Precor Inc. | Diverging Seated Row RSL 310 | Assembly Guide
7
Moving Parts
Image
Hardware
Instructions
1
2 collars
Slide collars onto arm shafts on main frame . Place flush sides
towards frame.
Slide the left and right arm assemblies on the shafts on the
main frame . Each arm and shaft are labeled with and .
Match the labels to ensure correct assembly.
2 washers, rubber, black
2 washers, 12.2 mm ID x 35 mm OD
2 M12 x 25 mm SHCS
Tools: Hex wrench, 10 mm
Torque wrench
Secure arms into place as shown. Hold washers centered while
tightening.
Tighten to 55 ft-lb (74 N m).
Remove all and labels.
2 end plugs with sleeves
Tool: Mallet
Slide end plugs with sleeves onto arm ends. Tap gently with mallet
if needed.
1
1
32
36
35
1
3
2
49
L
R
L
3
32
35
36
49
2
L
R
1
2
L
33
33
L
R
