©2019 Precor Inc. | Triceps Extension RSL 208 | Assembly Guide
9
4
1 M10 x 65 mm SHCS
2 washers, 11 mm
1 M10 nylon lock nut
Tools: Hex wrench, 8 mm
Socket wrench, 17 mm
1 guide rod with cap
Prepare the lower base for the add-on weight assembly. Place the retaining
screw through the bracket on the weight stack spacer.
Remove the cap from the guide rod and place the rod into bracket opening se-
cured by the screw.
5
2 bumpers
1 add-on weight
1 add-on weight handle
Place one bumper onto the third guide rod, followed by another bumper (wide
sides together), the add-on weight, and the add-on weight handle.
6
1 counterweight
Place counterweight over front two rods and handle.
7
Straighten the front two guide rods to a vertical position. Have your assistant lift
the guide rods up into the upper part of the frame.
8
Tools: Hex wrench, 6 mm
Torque wrench
While the assistant is
holding the rods into the upper frame, reinsert the two
bolts underneath the guide rods in the bottom frame, and secure to the kick
plate. Let the guide rods drop onto the bolts and fully tighten the bolts.
Tighten
M10 screws to 32 ft-lb (43 N-m) of torque.
12
44
36
49
9
5
15
7
12
15
36
44
7
9
5
49
36
43
