Precor Experience 700 line Series, Руководство по обслуживанию

Страница: 32 / 232

DIAGNOSTIC
TEST
TEST DESCRIPTION
DISPLAY TEST Tests the console LEDs. Successively press the OK key to verify each
group of LEDs and verify that all LEDs illuminate. Press Back to exit
the test.
KEYBOARD TEST An illuminated LED map of the function keys will be shown. Press
each individual key and verify that the corresponding LED extin-
guishes. Press and hold
BACK to exit the test.
PVS KEY TEST Not used, OEM test.
HEART RATE Tests the unfiltered, filtered, and pulse heart rate. Grasp the grips to
test the hand held heart rate. Use a Polar heart rate simulator to test
the wireless heart rate. Press the
BACK button to exit this test.
ACTIVE STATUS
LIGHT
(1)
The current ASL
1
status light state (blue. pulsing blue, yellow, &
pulsing yellow).
AS LIGHT
BRIGHTNESS
(1)
Sets the ASL light brightness level and ON/OFF state: HIGH. MED,
LOW, and ON/OFF.
MC
2
LIGHT Shows current state of MC LED-Hold Quick Start to reset.
BELT SPEED
TEST Menu path: MACHINE TEST > BELT SPEED TEST
Tests belt operating condition in 0.1 speed increments
Test parameters:
• AMPS IN: Treadmill input Current.
• VOLTS IN: Treadmill input Voltage
• VBUSS: Treadmill internal buss Voltage
• AMPS MTR: Current supplied to the drive motor.
AUTO STOP TEST Menu path: MACHINE TEST > AUTO STOP TEST
Test parameters;
• Status - Exerciser detected on or off the running belt.
• Step Count - Average # of footplants. Footplant averaging delay
reset with each speed change.
.
INCLINE TEST Menu path: MACHINE TEST > INCLINE TEST
Test parameters;
1
Active Status Light: Service and maintenance status light.
2
Motor Controller Module
Page 24
3 Standard Service and Diagnostics Software
Hardware Validation Service Menu (51765761)