Precor Cycle 842i, Руководство пользователя для продукта

Страница: 26 / 96

EFX: Changing the Auto-Level Setting
You can set a specific ramp incline so that the EFX automatically
returns to it at the end of a workout session. Whatever incline you
set, the EFX ramp returns to the setting if a user continues
pedaling, once the program session has ended, and presses
RESET to return to the Precor banner.
Note: This setting is available on equipment with adjustable ramps.
Important: If you use this feature, connecting the optional power
adapter is recommended. Instruct users about the auto-leveling
feature and ask that they hold onto a stationary handrail with one
hand while the equipment automatically moves to the set incline.
1.
2.
3.
At the S E T C R O S S R A M P A U T O - L E V E L prompt, press OK.
X R A M P
n appears, where n is the ramp incline setting. Some
displays only show a number without prefacing it with X R A M P .
Use the navigational arrow keys to select the desired ramp
incline setting from 1 to 20.
When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in
Accessing Club Programming Mode and Changing the
Settings .
Cycle: Setting a Resistance Range
You can set a low, medium or high range of resistance on the
recumbent or upright cycles. Within each setting, 25 levels of
resistance are available, but the chosen setting affects the overall
resistance range.
Physical therapy conditioning is an example where you might use
this programming feature. If a user has an injury that needs low
levels of resistance, you might set the resistance range to low to
make sure that
the user does not induce further injury by exceeding
your recommended levels of resistance.
The following table provides short descriptions of each group.
Product Owner's Manual: Club Features 24