WARNING
• Use this Flowmeter only for its “Intended Use” as described
in this manual.
• alWaYS confirm prescribed flow before administering to
patient and monitor flow on a frequent basis.
• This Flowmeter contains magnetic, ferrous material that may
affect the results of an MRI.
To Reduce the Risk of Fire or Explosion:
•
alWaYS follow aNSI and CGa standards for Medical Gas
Products and Flowmeters (E-7) and Oxygen Handling (G-4).
•
DO NOT use oils, greases, organic lubricants or any
combustible materials on or near this Flowmeter.
•
DO NOT use near any type of flame or flammable/explosive
substances, vapors or atmosphere.
•
DO NOT smoke in an area where oxygen is being administered.
CAUTION
• This Flowmeter must be operated with the Flow Tube in a
vertical, upright position.
• Only personnel instructed and trained in its use should
operate this Flowmeter.
• Be sure all connections are tight and leak free.
• Only use oxygen-safe leak detector.
•
DO NOT autoclave.
•
DO NOT gas sterilize with EtO (Ethylene Oxide).
•
DO NOT clean with aromatic hydrocarbons.
•
DO NOT immerse product in any kind of liquid. This will void
the warranty.
• This Flowmeter may have a factory installed restrictor. Prior to
use, check product labeling for flow restrictions.
• This Flowmeter contains a glass flowtube which is fragile.
Special care should be observed to avoid braking the flowtube.
