Precision matthews PM-940V-PDF, Руководство пользователя

Страница: 5 / 23

CLEANING
(1)
Your machine has been coated with a heavy grease to protect it in
shipping. This coating should be completely removed before operating
the machine. Commercial degreaser, kerosene or similar solvent may be
used to remove the grease from the machine, but avoid getting solvent
on belts or other rubber parts.
(2) After cleaning, coat all bright work with a light lubrication . Lubricate all
points with a medium consistency machine oil.
LUBRICATION:
All ball bearings in your mill/drill are sealed for life ,requiring no lubrication.
Points requiring lubrication are:
(1)Internal spline drive assembly. Keep this area well lubricated with a good
grade grease , insert grease in the hole at the top of spindle pulley spline
driver,lube twice yearly.
(2)A light film of oil applied to the quill and column will reduce wear, prevent
rust, and assure ease of operation.
(3)
Quill return spring should receive oil(sae 20) once yearly. Remove cover
plate and apply oil with squirt can or small brush.
(4) Apply lubriplate to quill pinion every 90 days.
NOTE: use extreme care when performing this operation and keep hands
clear of pinch points. When using paraffin bar, do this only by turning the
sheaves by hand. Do not apply with motor running.
USE OF MAIN MACHINE PARTS
(1)
To raise and lower the head by head handle.
(2) Equipped with an electric switch for tapping operation clockwise or
counterclock wise.
(3) To adjust the quick or slow feeding by feed handle.
(4) To adjust the table left and right travel by table handle wheel.
(5) To adjust the table fore and after travel by table handle wheel.
(6) To operate the spindle handle wheel for micro feed.
(7) To adjust the scale size according to working need.
PRECAUTION FOR OPERATION
Check all parts for proper condition before operation; if normal safety
precautions are noticed carefully, this machine can provide you withstanding
of accurate service.
(1)
Before Operation