6
PM-30MV v3 2020-10
Copyright © 2020 Quality Machine Tools, LLC
PM-30MV SPECIFICATIONS
T-slot dimensions
Dimensions
Approximate net weight
Machine only 530 lb, stand 75 lb
Overall size (on stand)
W 46-1/4 in. x D 31 x H m
ax. 74-1/2
(headstock at normal working height, H =
67
in.)
Stand footprint
W 14-1/2 in. x D 21-1/4
Tray
W 22-1/2 in. x D 26-1/4
Electrical
Power requirement
220V, 60Hz, single phase, 15A minimum
Spindle motor
Brushless dc, 1.5 kW (2 HP)
X-axis power feed (option)
Gear motor: 110V, 60 Hz, single phase
Headstock
Vertical travel*
14-1/2 in.
Left-right tilt
90 degrees clockwise/counter-clockwise
Spindle
Speed
Low range 50 to 1500 rpm, High range 1400 to 3000
Internal taper
R8
Quill travel
3 in.
Spindle nose to table
18-1/4 in. max
Spindle centerline to column
7-1/2 in. to pleated cover, 8-5/8 in. cover absent
Drawbar
Standard 7/16-20 thread
Table
Size
33 x 8-1/4 in.
Height over floor (on stand)
36 in. approx.
Maximum load
300 lb, table centered (less if overhanging)
Leadscrews
Acme, inch pitch, 10 TPI
Left-right travel (X-axis)*
23 in.
Front-back travel (Y-axis)*
7-5/8 in.
T-slots (3)
14 mm wide, 63.5 mm (2-1/2 in.) centerline spacing
* DRO installation may limit these numbers