Precision matthews PM-1127VFI-LB, Инструкция по безопасности и обучению

Страница: 28 / 34

Maintenance
Keeping a Well Maintained Machine
There is nothing more important that keeping a well maintained
machine to help you enjoy a life time of use.
Lubrication:
Lubrication is probably the one thing that will keep your machine
humming along for a lifetime. Consult the manufacturers manual
for the recommended lubrication.
Check the oil level at least once a month and change the oil
once a year.
The lathe is equipped with oil buttons to lubricate the moving
parts of the machine. Use the recommend oil for lubricating
these points. It is important to keep these points moving freely,
so plan on adding oil once a week.
If the machine has been sitting for a little while, make sure to
check the oil level and add oil to all the oil buttons on the
machine.
Grease Points
You should also coat the gear train gears with a light layer of
Multi-Purpose Moly Grease
Corrosion Protection
Here in California we are fortunate to not experience high
humidity which can cause corrosion on the bare metal surfaces
of the machine. However is it good practice to keep these
surfaces protected at all times with a light coat of oil.
.