Helios PD2-6200 Analog Input Flow Rate/Totalizer
Instruction Manual
32
Setting the Display Parameter &
Intensity (
dsplay
)
Display line 1 can be programmed to display:
1. Rate value
2. Total or grand total
3. Toggle rate/total
4. Toggle rate/G-total
5. Relay set points
6. Toggle rate and units
7. Toggle total and units
8. Toggle grand total and units
9. Max, min, or max & min values
10. Modbus input
Display line 2 can be programmed to display:
1. Engineering units or custom legends
for line 1
2. Rate value
3. Total or grand total
4. Toggle rate/total
5. Toggle rate/G-total
6. Relay set points
7. Toggle rate and units
8. Toggle total and units
9. Toggle grand total and units
10. Max, min, or max & min values
11. Modbus input
12. Off (no display)
Selecting engineering units or custom legends as
display line 2 (
d unit
) will display the unit or tag
selected for the rate, total, or grand total displayed on
line 1.
For example, if line 1 is set to
total
, selecting
d unit
to display on line 2 will have the total appear
on line 1, and the total unit appear on line 2.
After setting up the input and the display, press the
Menu button to exit programming and skip the rest of
the setup menu. Press the Menu button again and the
Up arrow to reach the
Program
menu and complete
the scaling or calibration of the meter.
Display Flow Rate, Total or Grand
Total
Line 1 can be programmed to display flow rate, total,
or grand total, and line 2 can be programmed to
display flow rate, total, grand total, engineering units,
custom legends, or be turned off. Both lines can also
display relay set points, or max and min values.
Display Toggling Between Reading
& Units
The PD2-6200 can be programmed so that line 1 and
line 2 toggle between the reading and their
engineering units. For instance, line 1 displays flow
rate, line 2 displays total, and the display toggles to
show their units.
Display Intensity (
d-Inty
)
The meter has eight display intensity levels to give the
best performance under various lighting conditions.
Select intensity 8 for outdoor applications. The default
intensity setting is 6.
