PD8-6060 Explosion-Proof Dual Analog Input Process Meter
Instruction Manual
35
Display Functions & Messages
The meter displays various functions and messages
during setup, programming, and operation. The
following table shows the main menu functions and
messages in the order they appear in the menu.
Display Functions & Messages
Display
Parameter
Action/Setting Description
setup
Setup
Enter
Setup
menu
Input
Input
Enter
Input
selection menu
Ch-A*
Input
Set input type for channel A
(*or B)
nmA
4-20 mA
Set meter for 4-20 mA input
Volt
0-10 VDC
Set meter for
10 VDC input
units
Unit
Select the display units/tags
Ch-A*
Unit
Set unit or tag for channel A
(*or B or C)
Dec pt
Decimal point
Set decimal point
Ch-A*
Decimal point
Set decimal point for
channel A (*or B or C)
prog
Program
Enter the
Program
menu
InCAL
Input
calibration
Enter the
Input Calibration
menu
Ch-A*
Input A
Set input type for channel A
(*or B)
SCAL A
Scale A
Enter the
Scale
menu for
channel A
SCAl B
Scale B
Enter the
Scale
menu for
channel B
Cal A
Calibrate A
Enter the
Calibration
menu
for channel A
Cal B
Calibrate B
Enter the
Calibration
menu
for channel B
Inp 1
Input 1
Calibrate input 1 signal or
program input 1 value
Dis 1
Display 1
Program display 1 value
Inp 2
Input 2
Calibrate input 2 signal or
program input 2 value
(up to 32 points)
Dis 2
Display 2
Program display 2 value
(up to 32 points)
Error
Error
Error, calibration not
successful, check signal or
programmed value
dsplay
Display
Enter the
Display
menu
Line 1
Line 1
Assign line 1 parameter
Line 2
Line 2
Assign line 2 parameter
D Ch-A
Display Ch-A
Assign display to channel A
D Ch-B
Display Ch-B
Assign display to channel B
D Ch-C
Display Ch-C
Assign display to channel C
(math)
D Ab
Display AB
Alternate display of
channel A & B
D AC
Display AC
Alternate display of
channel A & C
Display Functions & Messages
Display
Parameter
Action/Setting Description
D BC
Display BC
Alternate display of
channel B & C
D AbC
Display ABC
Alternate display of
channel A, B, & C
D set1*
Display set 1*
Displays relay 1(*through 4)
set point.
D Hi-A
Display high
A
Display high value of
channel A
D Lo-A
Display low A
Display low value of
channel A
D HL-A
Display
hi/low A
Alternate between high/low
value of channel A
D Hi-B
Display high
B
Display high value of
channel B
D Lo-B
Display low B
Display low value of
channel B
D HL-B
Display
high/low B
Alternate between high/low
value of channel B
D Hi-C
Display high
C
Display high value of
channel C
D Lo-C
Display low C
Display low value of
channel C
D HL-C
Display
high/low C
Alternate between high/low
value of channel C
D a-u
Display A and
units/tags
Alternate display of
channel A and the unit/tag
D B-u
Display B and
units/tags
Alternate display of
channel B and the unit/tag
D C-u
Display B and
units/tags
Alternate display of
channel C and the unit/tag
A Gros
Display A
gross
Display input channel A
gross (no tare)
A nt-G
Display A net
and gross
Alternate display of
channel A net (tare) and
gross (no tare)
B Gros
Display B
gross
Display input channel B
gross (no tare)
B nt-G
Display B net
and gross
Alternate display of
channel B net (tare) and
gross (no tare)
nm bus
Display
Modbus
®
Display Modbus
®
input
register
D off
Display off
Display blank (line 2)
D unit
Display unit
Display line 1 channel units
d-Inty
Display
intensity
Set display intensity level
from 1 to 8
RELaY
Relay
Enter the
Relay
menu
Assign
Assignment
Assign relays to channels or
Modbus
®
Asign1
Assign 1
Relay 1 assignment
Ch-A*
Channel A*
Assign relay to channel A
(*or B or C)
nm bus
Modbus
®
Assign relay to Modbus
®
register
RLY 1
Relay 1
Relay 1 setup