PDW30 Point-to-Point Wireless Bridge Instruction Manual
16
Setup Menu
The setup menu consists of analog, digital (discrete), and Modbus
®
input/output settings, network ID,
password, and factory defaults restoration.
The
primary
wireless unit determines network protocol and digital I/O settings for the
secondary
unit, sim-
plifying the setup process. For instance, if a digital connection is programmed to be an
input
on the
pri-
mary
unit, that same connection will be an
output
on the
secondary
unit. Because of this, the
secondary
wireless unit has fewer menu options than the
primary
unit.
Primary Device
Secondary Device
Entering Numeric Values
Numeric values are set using the
next
and
previous
buttons. Press
next
to select next digit and
previous
to increment digit value.
The selected digit will flash.
Press the
enter
button, at any time, to accept the value or the
menu
button to exit without saving.
LINK OK
PRI RSSI 10 RT
SETUP
ANALOG INPUT
SETUP
DIGITAL IO
MODBUS SETUP
NETWORK AND
SETUP
PASSWORD
DEFAULTS
RESTORE
Run Mode
LINK OK
SEC RSSI 10 RT
NOW: 01
NETWORK ID
NOW: 4-20mA
ANALOG INPUT
NOW: 0.2 SEC
MODBUS TIMEOUT
SETUP
PASSWORD
DEFAULTS
RESTORE
Run Mode
NOW: 01
NETWORK ID
SET: 01
NETWORK ID
SET: 11
NETWORK ID
SET: 11
NETWORK ID
SET: 12
NETWORK ID
Access
edit mode
Increment
selected digit
Select the
next digit
Increment
selected digit
Accept
new value
