Precision CAM Cowcam, Руководство пользователя

Страница: 33 / 48

28
USING YOUR SYSTEM: THE DVR
This will be a basic overview of how to use your DVR. For detailed instructions please
refer to the DVD manual included with the DVR.
DVR layout diagram:
A B C D E F
G H I
A) Alarm indicator; this light will come on when an alarm is triggered.
B) Network error indicator; this light will come on when there is a network issue.
C) Hard disk error indicator; this light will come on if there is a hard disk problem.
D) IR remote receiver; picks up signal from remote.
E) Escape key; used to exit menus.
F) Navigation keypad and enter key; used to navigate through menus.
G) Front USB port; used to connect mouse or USB stick.
H) Function key; used to access additional features in menus.
I) Power button; can be used to power off unit.
The basics:
•
When you first power up your DVR you may see the “ admin security ” and
“ start - up wizard ”, you can just click cancel for both.
•
To log into the DVR, use the user name “ user ” and the password “8878”.
•
To make your remote control work you may need to add it. To do this, point
the remote at the DVR and press the add button at the top of the remote. A
window will pop up on the screen. Enter the number 008 in the window and
click ok. The remote is now ready to use.
•
There are a couple of different camera viewing options available on the DVR.
To change the view, right click on the screen with the mouse and choose either
view 1 to view a single camera or view 4 to see 4 cameras at the same time in a
split screen configuration.
•
You can also control your PTZ cameras through the DVR by right clicking on the
camera you want to control and selecting PTZ. This will bring up a small control
panel you can use to move the camera.