■
4 Safety Instructions and Conformity
8
4
Safety Instructions and Conformity
4.1
Conformity
The moisture analyser has been manufactured and tested in accordance with the standards and directives
set out in the enclosed certificate of conformity.
4.2
Safety Instructions
• When using the moisture analyser in surroundings with increased safety requirements, the corresponding
regulations must be observed.
• Only use an extension cord with a protective earth conductor.
• Be sure to hold the plug, not the cable, when disconnecting the moisture analyser from an electrical outlet.
• If the power cable is damaged unplug the moisture analyser immediately from the electrical outlet and keep
it from inadvertent operation.
• If there is any reason to believe that it is no longer possible to operate the moisture analyser without dan-
ger, it must be immediately unplugged from the electrical outlet and kept from inadvertent operation.
• In carrying out maintenance work, it is essential to heed the instructions in the chapter “Maintenance and
servicing“ of the operating instructions.
• Do not operate the moisture analyser in an area subject to explosion risks or caustic atmospheres.
• Do not exceed the maximum permissible load of the dryer.
• When using the moisture analyser in combination with other appliances made by Precisa as well as with
appliances produced by other manufacturers, the current regulations for the safe use of the relevant at-
tachments and their application in accordance with instructions must always be observed
• The Operating Instructions must be read by everyone who has to operate the instrument and must be kept
handy on-site at all times.
DANGER
Before connecting the moisture analyser to the mains, be sure that the operating voltage stated on the
moisture analyser power cable agrees with the local mains voltage. If it doesn‘t, the equipment must not
be connected to the mains at all! In this case contact the Precisa Customer Service.
DANGER
Do not place any flammable materials on, under or beside the instrument.
Leave enough clear space around the instrument to prevent a build-up of heat.
The moisture analyser may not be used to analyze explosive, highly flammable samples.
Do not operate the moisture analyser in areas where there is any risk of explosion.
Sample materials which release toxic substances must be dried in a fume hood. Take care not to inhale
any harmful vapors.
Ensure that no liquid seeps inside the instrument or into the connection ports on the back of the
instrument.
If you spill any liquid onto the instrument, unplug it from the electrical supply immediately.
Do not operate the moisture analyser again until you have had it checked by a Precisa service engineer.
