Precisa 350-8182-000, Руководство по эксплуатации

Страница: 42 / 85

390 System Settings
Precisa Gravimetrics AG 41
6.2.3.4 Mode of the communication
Server
The Server communication mode is used when a PC, LIMS or other device wants to connect to the
balance. It is recommended to use a static IP address, as the balance can always be reached with
the same address. Further details about the setup and the local port can be found below.
Client
The Client communication mode is used when the balance wants to connect to a passive device
such as a printer. The use of an automatic IP address proivided by a DHCP server is usually
sufficient, since the address of the balance is not relevant. Further details about the setup and the
remote host port as well as the remote host address can be found below.
Using DHCP or a static IP address
To connect the balance to the network, the details must be discussed with the network
administrator. It is important to know whether to assign to the balance a static IP address or an
automatic IP address from a DHCP server. In addition, the network administrator knows the port of
the remote terminal of the network connection; for Precisa printers or software, this is normally
port 2101 or 4001.
If an automatic IP address of the DHCP server is sufficient, switching on DHCP automatically
connects the balance into the network.
In case a static IP address must be used, the network administrator knows the settings of the IP
address, subnet mask and default gateway.