Clean the front transparent cover at least every 6 months. Use a moist,
lint-free cloth. Never use alcohol or solvents.
A scheduled maintenance programme must be carried out on the
installation and the fittings regardless of their IP rating or application –
these must include the following operations:
●
Clean the fittings from dirt that may be deposited on the protection
grills and in the heads of the screws by following the installation
instructions attached to each fi tting.
●
Check that the screws are not loose on the various components of
the luminaire (glass frame, cable entry , ….).
●
Check each cable gland, and cable for damage and that the cable
gland has not come loose.
●
For each Isolation Class 1 fitting check that the earth cable has not
come loose. The clip must not show signs of oxidation,damage or
become loose.
●
For class 2 fittings check any eventual plastic / isolating covering in
order to verify any damage.
●
Check that all the seals are in good condition and that they are not
dry, damaged or split.
●
Check the glass or plastic screen for damage and replace if required.
●
Check for water inside the luminaire’s housing and its recessing box.
The internal components such as the ballasts, transformers, washers
and screws must not show clear signs of oxidation or rust.
Clear traces of rust and oxidation will indicate the presence of water
inside the luminaire.
In case of damage the components must be replaced by original
components and spare parts before using the fi tting.
We also recommend to check the fitting each time the lamp is replaced
or at least once a year or within the prescribed maintenance schedule
period depending on the type of installation.
5. CARE AND MAINTENANCE
17
PRECILUM™ PRODUCTS ARE OF SUPERIOR DESIGN AND
QUALITY AND SHOULD BE TREATED WITH CARE. THE
RECOMMENDATIONS BELOW WILL HELP FULFILL GAIN GOOD
USE AND LONGEVITY FROM THE PRODUCTS.
INGR. 15 RGB + INGR. 24 RGB + INGR. 31 RGBW + INGR. Q7 RGBW
INSTRUCTIONS MANUAL v1.1
