Tighten the screws
3. INSTALLATION
8
Fig. 7
Fig. 8
Fig. 9
●
Fasten the luminaire to
the plastic sleeve with
the enclosed screws.
Fig. 7
●
Put on the stainless steel
front ring which you
removed in step 5 (Fig.5).
Fig. 8
●
Put on and tighten the
screws which you
removed in step 4 (Fig.4).
●
Check if the screws are
tight properly!
Fig. 9
Tighten the screws
INGR. 15 RGB + INGR. 24 RGB + INGR. 31 RGBW + INGR. Q7 RGBW
INSTRUCTIONS MANUAL v1.1
