Precidia Ether232Plus, Руководство пользователя

Страница: 23 / 96

Ether232 Plus User Guide 3 Configuring the Ethernet Settings
02-CML000057 Precidia Technologies Inc. 17
3.1.2 Static - (No DHCP) IP Address Settings
To enter or change the
IP address
:
1
Choose Ethernet from the
Device Settings
menu.
2
Choose IP Address from the
Ethernet Settings
sub-menu.
You are prompted to enter the IP address of the device.
3
Type the unique IP address at the prompt (in the format xxx.xxx.xxx.xxx) and press
Enter
.
3.2 Subnet Mask (Static — No DHCP)
The subnet mask is used to determine what subnet an IP address belongs to. The mask
allows a router to determine the network and host addresses, and forward data packets
correctly.
To enter or change the
Subnet Mask
:
1
Choose Ethernet from the
Device Settings
menu.
2
Choose Subnet Mask from the
Ethernet Settings
sub-menu.
You are prompted to enter the subnet mask of the device.
3
Type the subnet mask (e.g. 255.255.255.0) at the prompt (in the format
xxx.xxx.xxx.xxx) and press
Enter
.
3.3 Gateway (Static — No DHCP)
If the device will be communicating with a host that is not on the local subnet, you
must specify the router address (gateway) that will forward data to the destination. If
the destination is within the LAN and can be accessed without passing through a
router, you can leave this field blank (0.0.0.0). This setting is the default gateway.
To enter or change the
Gateway
:
1
Choose Ethernet from the
Device Settings
menu.
2
Choose Gateway from the
Ethernet Settings
sub-menu.
You are prompted to enter the IP address of the gateway.
3
Type the gateway address at the prompt (in the format xxx.xxx.xxx.xxx) and press
Enter
.